SHOWTEC DMX Recpack 4, Manual

Page: 28 / 36

27
Ordercode: 50822
DMX Recpack 4
7.1. Set Date & Time
In this menu you can set the device’s clock.
01)
The display will show:
02) Press the LEFT/RIGHT/UP/DOWN buttons to select the year, month, day, hours, minutes or seconds.
03) Press the HOME button to enter edition mode.
04) Press (or press and hold down, for quick search) the UP/DOWN buttons to change the values.
05) Press the HOME button to confirm your choice.
06) Press the LEFT/RIGHT/UP/DOWN buttons to select CANCEL (to discard changes) or ENTER (to save
changes).
07) Press the HOME button to confirm your choice.
7.2. Set Max Current
In this menu you can determine the maximum current on each port.
01)
The display will show:
02) Press the LEFT/RIGHT/UP/DOWN buttons to select one of the 4 ports.
03) Press the HOME button to enter edition mode.
04) Press (or press and hold down, for quick search) the UP/DOWN buttons to change the values. The
adjustment range is between 0-10A.
05) Press the HOME button to confirm your choice.
06) The total amperage should not exceed 15A. If it does, the device will inform you about that.
07) Press the LEFT/RIGHT/UP/DOWN buttons to select CANCEL (to discard changes) or ENTER (to save
changes).
08) Press the HOME button to confirm your choice.
7.3. Set OLED Option
In this menu you can set how much time needs to pass before the display turns off, when no button is
pressed.
01)
The display will show:
02) Press the HOME button to enter edition mode.
03) Press the UP/DOWN buttons to set the amount of time which needs to pass before the display turns
off, when no button is pressed. The adjustment range is between 5 seconds and Always ON.