24
Ordercode: 50822
DMX Recpack 4
05)
Once you have renamed the file, press the UP/DOWN/LEFT/RIGHT buttons to select CANCEL (to
discard changes) or ENTER (to confirm the new action name). Press the HOME button to confirm your
choice.
06)
Press the UP/DOWN buttons to select TARGET and press the RIGHT or HOME button to open the menu.
07)
Press the UP/DOWN buttons to select one of the 5 options:
●
STOP: stop playback
●
LOOP: play the desired file in a loop
●
SINGLE: play the desired file once
●
SW-OFF: switch the desired power port OFF
●
SW-ON: switch the desired power port ON
08)
Press the RIGHT or HOME button to confirm your choice.
09)
Press the UP/DOWN buttons to select TRIGGER and press the RIGHT or HOME button to open the
menu. Press the UP/DOWN buttons to choose the sort of trigger you want to use: DMX trigger, daily
trigger, weekly trigger or a manual trigger. Press the RIGHT or HOME button to confirm your choice.
Press the UP/DOWN buttons to select the desired file and press the RIGHT or HOME button to confirm
your choice. Press the LEFT/RIGHT buttons to select ENTER (to confirm) or RETURN (to discard your
choice).
10)
Press the UP/DOWN buttons to select DELAY and press the RIGHT or HOME button to open the menu.
Press the UP/DOWN buttons to set a delay. The adjustment range is between 0-10 seconds. Press the
RIGHT or HOME button to save changes.
11)
Press the UP/DOWN buttons to select SOURCE and press the RIGHT or HOME button to open the
menu. Press the UP/DOWN buttons to select the desired source: scene file, chase file, show file or
incoming DMX signal. If you have chosen SCENE_FILE, CHASE_FILE or SHOW_FILE, press the RIGHT or
HOME button to open the menu. Press the UP/DOWN buttons to select the desired file and press the
RIGHT or HOME button to confirm your choice. Press the LEFT/RIGHT buttons to select ENTER (to
confirm) or RETURN (to discard your choice).
12)
Press the UP/DOWN buttons to select PORT and press the RIGHT or HOME button to open the menu.
The display will show:
13)
Press the UP/DOWN buttons to select the desired port and press the RIGHT button to
activate/deactivate the port. Press the UP/DOWN buttons to select RETURN and press the RIGHT or
HOME button to return to the previous menu.
14)
Press the UP/DOWN buttons to select ENABLE and press the RIGHT or HOME button to open the menu.
Press the UP/DOWN buttons to select YES or NO and press the RIGHT or HOME button to confirm your
choice.
15)
Once you have adjusted all the options, press the UP/DOWN buttons to select one of the 2 options:
●
CONFIRM & SAVE: to save the action
●
CANCEL & RETURN: to discard the action
Note: Please note that the option described in step 11 (SOURCE) will be visible/editable only if you
choose SINGLE or LOOP in step 7 (see above).
Summary of Contents for DMX Recpack 4
Page 34: ...33 Ordercode 50822 DMX Recpack 4 Notes...
Page 35: ...34 Ordercode 50822 DMX Recpack 4...
Page 36: ...2017 Showtec...
