8
Ordercode: 42773
Digital Flex Strip RGB
Set Up and Operation
Follow the directions below, as they pertain to your preferred operation mode.
Before plugging the unit in, always make sure that the power supply matches the product specification
voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa.
Connect the device to the main power supply.
Remote Control
The remote control is divided into several sections, responsible for different functions.
01)
Point the remote control at the RGB controller.
02)
Press the buttons to activate the desired functions.
Fig. 03
Power Switch ON/OFF
01)
Press the
button to switch the device ON/OFF.
Cold/Warm White
01)
Press the
button to switch between Cold and Warm White modes.
