SHOWTEC CLUB PAR 12-6 RGBWAUV, Manual

Page: 15 / 24

14
Ordercode: 42651
Club Par 12-6 RGBWAUV
3. Speed
01) Press the MODE button until the display shows .
02) Press the SETUP button to open the submenu, then press the UP/DOWN buttons to adjust the run
speed of the built-in programs. The adjustment range is between , 00-99 (from
fast to slow).
4. Built-in programs
With this menu, you can set the built-in programs.
01)
Press the MODE button until the display shows .
02) Press the SETUP button to open the submenu, then press the UP/DOWN buttons to toggle between
one of the 13 built-in programs: .
03) The device will now run the desired built-in program.
5. Sound-controlled
With this menu, you can set the audio sensitivity.
01)
Press the MODE button until the display shows .
02) Press the SETUP button until the display shows . Use the control on the back to adjust the
sensitivity.
6. Static Colors
With this menu, you can set the static colors.
01)
Press the MODE button until the display shows .
02) Press the SETUP button to open the submenu, then press the UP/DOWN buttons to toggle between
one of the 63 built-in colors: .
03) The device will now run the desired static color.
7. Strobe
With this menu, you can set the Strobe speed.
01)
Press the MODE button until the display shows .
02) Press the SETUP button to open the submenu, then press the UP/DOWN buttons to set the strobe
speed: .
03) The device will now run at the desired strobe speed.
8. Red
With this menu, you can manually adjust the intensity of the red LEDs.
01)
Press the MODE button until the display shows .
02) Press the SETUP button to open the submenu, then press the UP/DOWN buttons to adjust the intensity
of the red LEDs. Adjustment range is between 0-255, from low to high intensity.
9. Green
With this menu, you can manually adjust the intensity of the green LEDs.
01)
Press the MODE button until the display shows .
02) Press the SETUP button to open the submenu, then press the UP/DOWN buttons to adjust the intensity
of the green LEDs. Adjustment range is between 0-255, from low to high intensity.
10. Blue
With this menu, you can manually adjust the intensity of the blue LEDs.
01)
Press the MODE button until the display shows .
02) Press the SETUP button to open the submenu, then press the UP/DOWN buttons to adjust the intensity
of the blue LEDs. Adjustment range is between 0-255, from low to high intensity.