17
Ordercode: 42673
Cameleon Spot Q4
5. Master/slave
In this menu you can set the device as a slave.
01)
While in main menu, press the UP/DOWN buttons until the display shows Slave.
02)
Press the SET button to open the menu, the display will show:
03)
If you choose Yes, the device will become a slave.
04)
If the device has not been set to slave, it is automatically classified as a master device. All slave
devices will follow the master movement. If the device has been set to slave, it will react the same as
its master device.
6. Settings
In this menu you can set several settings of the device.
01)
While in menu, press the UP/DOWN buttons until the display shows Settings.
02)
Press the SET button to open the menu, the display will show:
03)
Press the UP/DOWN buttons to scroll between the following menus: Curves Select, Dimmer Speed,
PWM Frequency, DMX Fail, DMX Sync, Lock and Factory.
6.1. Curves Select
In this menu you can adjust the dimming of the device by choosing a dimming curve.
01)
Press the UP/DOWN buttons until the display shows Curves Select.
02)
Press the SET button to open the menu, the display will show:
03)
Press the UP/DOWN buttons to choose the desired dimming curve out of the 4 available options:
