background image

 

  

 

 

   

 

Order code: 75132 

Multigrip Clamp 

Warning 

 

 

 

Unpacking Instructions 

Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure 
that all parts are present, and have been received in good condition. Notify the dealer immediately and 
retain packing material for inspection if any parts appear damaged from shipping or the carton itself 
shows signs of mishandling. Save the carton and all packing materials. In the event that a fixture must be 
returned to the factory, it is important that the fixture be returned in the original factory box and packing. 
 

Your shipment includes:  

 

Showtec Multigrip Clamp 

 

User manual 

 

 

Safety Instructions 

Every person involved with the installation, operation and maintenance of this device has to: 

 

be qualified 

 

follow the instructions of this manual 

 
Before use, please make sure that there is no damage caused by transportation.  
Should there be any, consult your dealer and do not use the device. 
 
To maintain perfect condition and to ensure a safe operation, it is absolutely necessary for the user to 
follow the safety instructions and warning notes written in this manual. 
 
Please consider that damages caused by manual modifications to the device are not subject to 
warranty. 
 
This device contains no user-serviceable parts. Refer servicing to qualified technicians only. 
 

IMPORTANT: 

The manufacturer will not accept liability for any resulting damages caused by the non-observance of 
this manual or any unauthorized modification to the device. 
 

 

Never remove warning or informative labels from the unit. 

 

Never use or continue to work with a damaged or defective clamp. 

 

Carefully inspect the clamp before use. 

 

Do not shake the device. Avoid brute force when installing or operating the device. 

 

Do not exceed the loading capacity of 25 kg. 

 

Do not open the device. It does not contain user-serviceable parts. 

 

Always pay attention to local regulations, with respect to occupational health, safety and general 
rules for safe working. 

 

Always check the national standards and regulations of the country where the clamp is used. 

Summary of Contents for 75132

















Reviews: