27
Galactic RGB-2000
Product code: 51346
Auto/Sound Shows
In this menu you can play the auto shows and the sound-controlled shows.
Press the FUNC button, until the display shows INTERNAL SHOW.
Press the ENTER button to open the menu.
Press the UP/DOWN buttons to choose the desired built-in program. The available programs are:
●
AUTO SHOW 1
●
AUTO SHOW 2
●
MUSIC SHOW 1
●
MUSIC SHOW 2
Set the show speed. See 6.6.5.6. Show Speed on page 30 for more information.
Set the sound sensitivity. See 6.6.5.5. Voic Sens (Sound Sensitivity) on page 30 for more information.
Note:
●
If you have chosen MUSIC SHOW 1 or 2, the device will play the show, reacting to the beat of music.
When there is no music for 3 seconds, the laser will turn OFF.
SD Show
In this menu you can play the ILD/PRG shows.
Insert the included SD card into the SD slot (13) on the rear of the device.
Press the FUNC button, until the display shows SD SHOW.
Press the ENTER button to open the menu.
Press the UP/DOWN buttons to choose one of the 2 options:
●
ILD SHOW: Runs individual laser shows (ILD files) from the SD card.
●
PRG SHOW: Runs PRG files. PRG files are programs (chases) consisting of multiple ILD files.
Press the ENTER button to open the desired menu.
Press the UP/DOWN buttons to toggle through the ILD files (if you have chosen ILD SHOW) or through
the PRG files (if you have chosen PRG SHOW). The laser will run the shows/chases in real time.
Press the ENTER button to proceed to the folder selection.
Repeatedly press the ENTER button to toggle through the folders. (See pages 35–37 for the complete
list of the available folders and files.)
Note:
●
Each folder name has to consist of a maximum of 8 characters. Any folder name longer than 8
characters will not be shown correctly on the LCD display.
●
Save ONLY ILD laser shows on the SD card. DO NOT save any other files on it.
●
The SD card supports up to 100 folders (255 files per folder).
●
The SD card has to be FAT32 formatted.
Create Your Own Show
On the SD card, in TEXT folder, there are 3 ILD files: birthday.ild, crazy.ild, love.ild.
If you want to create your own preprogrammed show with these 3 files, you should create a TXT file
with the following contents:
birthday.ild,12,3
crazy.ild,20,1
love.ild,18,4
Save this TXT file with name TEXT.TXT.
Change the extension of the file from TEXT.TXT to TEXT.PRG
Explanation: birthday.ild,12,3
Birthday.ild is the ILD show name, 12 is the scanner speed, 3 is how many times this show will be repeated.
