13
Ordercode: 50058
Quick DMX Rack 1024
08)
Now the device is in the correct column, and the warning triangle is gone:
LED indicators
When the device is plugged in the LED indicators will show the status of the Quick DMX Rack.
Power LED: Quick DMX Rack is receiving sufficient DC power.
USB LED: Quick DMX Rack is connected to the Quick DMX Rack software, and is receiving a signal from it.
IR LED: Quick DMX Rack is receiving a signal from the IR Remote.
The Program LEDs indicate that the program, assigned to the adjacent button, is running.
Troubleshooting
If the USB LED is not flashing, try the following steps:
01)
Shut down/close the Quick DMX Rack software.
02)
Disconnect the Quick DMX Rack from the computer.
03)
Wait 10 seconds.
04)
Re-connect the Quick DMX Rack to the computer.
05)
Re-open the Quick DMX Rack software.
06)
If this does not work, try re-installing the device driver manually.
07)
If re-installing the device driver does not work, call our aftersales or email:
Summary of Contents for 50058
Page 22: ...21 Ordercode 50058 Quick DMX Rack 1024 ...
Page 23: ...22 Ordercode 50058 Quick DMX Rack 1024 ...
Page 24: ... 2020 Showtec ...
