42
Pixel Bubble 75 Set
Product code: 44570
8.
Maintenance
Preventive Maintenance
Attention
Before each use, examine the device visually for any defects.
Make sure that:
●
All screws used for installing the device or parts of the device are tightly fastened and are not
corroded.
●
The safety devices are not damaged.
●
There are no deformations on housings, fixations and installation points.
●
The Pixel Bubble balls are not cracked or damaged.
●
The power cables are not damaged and do not show any material fatigue.
Basic Cleaning Instructions
The Pixel Bubble balls must be cleaned periodically in order to optimize the light output. The cleaning
schedule depends on the conditions at the site where the device is installed. When smoke or fog
machines are used at the site, the device will need more frequent cleaning. On the other hand, if the
device is installed in well-ventilated area, it will need less frequent cleaning. To establish a cleaning
schedule, examine the device at regular intervals during the first 100 hours of operation.
To clean the device, follow the steps below:
Disconnect the device from the electrical power supply.
02)
Allow the device to cool down for at least 15 minutes.
03)
Remove the dust collected on the external surface with dry compressed air and a soft brush.
04)
Clean the Pixel Bubble balls with a damp cloth. Use a mild detergent solution.
05)
Dry the Pixel Bubble balls carefully with a lint-free cloth.
06)
Clean the DMX and other connections with a damp cloth.
Attention
●
Do not immerse the device in liquid.
●
Do not use alcohol or solvents.
●
Make sure that the connections are fully dry before connecting the device to the power supply and
to other devices.
