SHOWTEC 43750, User Manual

Page: 38 / 52

37
Helix M1100 Q4 Mobile
Product code: 43750
Slave Mode
In this menu you can set the slave mode of the device.
01) Press the UP/DOWN buttons to select one of the following 2 options:
02) Press the SET button to confirm your choice.
03) If you have chosen YES, the device will be set as a slave and will react the same as the master
device.
Settings
In this menu you can adjust the device’s settings.
01) Press the UP/DOWN buttons to select one of the following 10 options:
02) Press the ENTER button to confirm the selection.
AC Power Loss
In this menu you can determine the behavior of the device in case of an AC power loss.
01) Press the UP/DOWN buttons to set the desired AC power loss setting. Choose one of the 2 options:
●
Battery backup (device will continue working on battery power if AC power is lost, the operation
mode will remain unchanged.)
● Emergency (device will overrule all operation settings and switch output to a bright white output
if AC power is lost. Once AC power has returned, then device will return to previous operation
mode.)