SHOWTEC 41752 Manual Download Page 4

 

  

 

 

   

 

Ordercode: 41752 

Festoonlight Q4 Booster 

IMPORTANT: 

The manufacturer will not accept liability for any resulting damages caused by the non-observance of 
this manual or any unauthorized modification to the device. 
 

 

Never let the power cord come into contact with other cables! Handle the power cord and all 
connections with the mains with particular caution! 

 

Never remove warning or informative labels from the unit. 

 

Never use anything to cover the ground contact. 

 

Never leave any cables lying around. 

 

Do not open the device. It does not contain user-serviceable parts. 

 

Do not modify or cut any part of the cable. Do not use if any part of the cable has been cut or 
modified. 

 

Do not hang using screws, nails, staples, or any other sharp fasteners that may pierce, abrade, or 
otherwise damage the cable. 

 

Do not secure the cable with staples or nails, or place on sharp hooks or nails. 

 

Only operate the device after having familiarized with its functions. 

 

Avoid flames and do not put close to flammable liquids or gases. 

 

Always disconnect power from the mains, when device is not used or before cleaning!  

 

This product is not intended for permanent installation. 

 

This product may be exposed to rain and moisture. 

 

Make sure that the available voltage is not higher than stated on the information label. 

 

Make sure that the cables are never crimped or damaged. Check the device and the cables from 
time to time. 

 

If device was dropped or struck, disconnect mains power supply immediately. Have a qualified 
engineer inspect for safety before operating. 

 

If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not 
switch it on immediately. The arising condensation water might damage your device. Leave the 
device switched off until it has reached room temperature. 

 

If your Showtec device fails to work properly, discontinue the use immediately. Pack the unit securely 
(preferably in the original packing material), and return it to your Showtec dealer for service. 

 

For adult use only. The fixture must be installed beyond the reach of children. Never leave the unit 
running unattended. 

 

This product is intended for temporary outdoor use (IP65). Do not expose the product to conditions 
which exceed the product’s Ingress Protection (IP) rating. 

 

The user is responsible for correct positioning and operating of the Booster. The manufacturer will not 
accept liability for damages caused by the misuse or incorrect installation of this device. 

 

This device falls under protection class I. Therefore it is essential to connect the yellow/green 
conductor to earth. 

 

Repairs, servicing and electric connection must be carried out by a qualified technician. 

 

WARRANTY: Till one year after date of purchase. 

 

Operating Determinations 

 

This device is not designed for permanent operation. Consistent operation breaks will ensure that the 
device will serve you for a long time without defects. 

 

The maximum ambient temperature ta = 40 °C must never be exceeded. 

 

In order to eliminate wear and improve the device’s lifespan, during periods of non-use, completely 
disconnect from power source via breaker or by unplugging. 

 

The relative humidity must not exceed 50 % with an ambient temperature of 40 °C. 

 

If this device is operated in any other way, than the one described in this manual, the product may 
suffer damages and the warranty becomes void. 

 

Any other operation may lead to dangers like short-circuit, burns, electric shock, crash etc. 

 

You endanger your own safety and the safety of others! 

 

 

Summary of Contents for 41752













Reviews: