13
Order code: 40102
Polar 300 Hybrid IP65 Moving Head
Multiple Polars (Master/Slave Control)
01)
Fasten the effect light onto firm trussing or mount it on flat surface. Leave at least 1,3 m on all sides for
air circulation.
02)
Secure the device with a safety cable (order code 70454 / 70456).
03)
Plug the end of the electric mains power cord into a proper electric power supply socket.
04)
Use a 5-pin DMX cable to connect the Polar to other devices.
The pins:
1.
Earth
2.
Signal (-)
3.
Signal (+)
4.
N/C
5.
N/C
05)
Link the units as shown in Fig. 07. Connect the first unit's DMX "out" socket with the second unit's "in"
socket, using a DMX cable. Repeat this process to link the rest of the units. The first connected device
will be automatically recognized as master device. To upload custom programs from the master
device to the slave devices, see 4. Option on page 26–27.
Fig. 07
Note: Link all cables before connecting electric power
Summary of Contents for 40102
