11
Order code: 40102
Polar 300 Hybrid IP65 Moving Head
Installation
Remove all packing materials from the Polar 300 Hybrid Moving Head. Check if all foam and plastic
padding is removed. Connect all cables.
Do not supply power before the whole system is set up and connected properly.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
Lock/Unlock the Moving Head
You can lock/unlock the moving head by sliding the lock pins:
●
Slide the tilt lock pin (02) upwards to disable and downwards to enable the vertical movement (Tilt)
of the fixture (see Fig. 06).
●
Slide the pan lock pin (03) to the left to disable and to the right to enable the horizontal movement
(Pan) of the fixture (see Fig. 06).
Always lock the moving head before transportation!
Make sure to release the lock pins before operating the fixture.
Fig. 06
Summary of Contents for 40102
