9
One / Multiple Matrix Blinder(s) DMX Control
1.
Fasten the effect light onto firm trussing. Leave at least 1 meter on all sides for air circulation.
2.
Use a 3-p or 5-p XLR cable to connect the Matrix Blinders and other devices.
3.
Link the units as shown in (figure 4), Connect a DMX signal cable from the first unit's DMX "out" socket to
the second unit's "in" socket. Repeat this process to link the second, third, and fourth units.
4.
Supply electric power: Plug electric mains power cords into each unit's Powercon socket, then plug the
other end of the mains power cord into proper electric power supply sockets, starting with the first unit.
Do not supply power before the whole system is set up and connected properly.
Multiple Matrix Blinders DMX Set Up
Fig. 4
Note : Link all cables before connecting electric power
Summary of Contents for 30711 Matrix Blinder 5x5
Page 20: ...18 Static Patterns...
Page 35: ......
