3
Packing content
ARTNODE PRO 8
• Power cord
• User manual
• Warranty card
TABLE OF CONTENTS
Safety
General instructions
Warnings and installation precautions
General information
Introduction
Description and Technical specifications
Maintenance
Cleaning the unit
Using the Function Menu
Menu display navigation
Menu structure
Configuring Net address
Configuring Subnet address
Configuring Universes
Configuring DMX Outputs
Configuring IP address
Changing the fuse
Dimensions and Overview
FUSE REPLACEMENT
1. Disconnect this product from the power outlet.
2. Using a screwdriver, pry the fuseholder out.
3. Remove the blown fuse and replace with a good fuse of the same type
and rating (250V/T250mA).
4. Reinsert the fuse holder back in place and reconnect power.
MAINTENANCE
MAINTENANCE AND CLEANING THE UNIT
• Keep free of dust and grease
• Do not use alcohol, acetone or other solvents
• Disconnect from power before cleaning
MENU STRUCTURE
MENU
VALUES / OPTIONS
DESCRIPTION
Net
0 - 127
Sets the Net address
Subnet
0 - 15
Sets the Subnet address
Universe #1
0 - 15
Universe #2
0 - 15
Universe #3
0 - 15
Universe #4
0 - 15
Universe #5
0 - 15
Universe #6
0 - 15
Universe #7
0 - 15
Universe #8
0 - 15
DMX Output #1
ArtNet Input
DMX #1 Input
DMX #2 Input
Without
Input
DMX Output #2
ArtNet Input
DMX #1 Input
DMX #2 Input
Without
Input
DMX Output #3
ArtNet Input
DMX #1 Input
DMX #2 Input
Without
Input
Sets the ArtNet universe for the corresponding DMX Out port
(only when the DMX port is set to ArtNet)
ArtNet Input:
Input source for each DMX Out port is ArtNet
DMX #1 Input:
Input source for each DMX Out port is DMX In Port 1
DMX #2 Input:
Input source for each DMX Out port is DMX In Port 2
No Input:
DMX Out port is turned off
DMX Output #4
ArtNet Input
DMX #1 Input
DMX #2 Input
Without
Input
DMX Output #5
ArtNet Input
DMX #1 Input
DMX #2 Input
Without
Input
DMX Output #6
ArtNet Input
DMX #1 Input
DMX #2 Input
Without
Input
DMX Output #7
ArtNet Input
DMX #1 Input
DMX #2 Input
Without
Input
DMX Output #8
ArtNet Input
DMX #1 Input
DMX #2 Input
Without
Input
IP Address #1
X.XXX.XXX.XXX
Sets the two IP addresses
IP Address #2
X.XXX.XXX.XXX
Note: IP addresses must be unique (not the same)
Device ID
XXXXXXXXXX
Shows the Device ID
ArtNet Input:
Input source for each DMX Out port is ArtNet
DMX #1 Input:
Input source for each DMX Out port is DMX In Port 1
DMX #2 Input:
Input source for each DMX Out port is DMX In Port 2
No Input:
DMX Out port is turned off
6
