Replacing neon lamps type (2)
Remove neon tube
Remove all starters and/or ballasts
Rewire all G13 lamp sockets
according picture on right side
Install LED tube
Do not care about alignment
Switch on power
Replacing neon lamps type (1) or type (2) with multiple neon tubes per field
Remove neon tubes
Remove all starters and/or ballasts
Rewire all G13 lamp sockets
according picture on right side
More tubes in parallel connection
Install LED tubes
Do not care about alignment
Switch on power
WEEE-Declaration
Your product is designed and manufactured with materials and components of high quality, which are recyclable and can be reused. The symbol
means that your product should be disposed of separately from household waste when it reaches its end of life. Please dispose of this equipment at
your local collection point or recycling center. Please help to protect the environment in which we all live.
All specifications and appearances are subject to change without notice. All information was correct at time of printing. Musikhaus Kirstein GmbH does
not guarantee for the accuracy or completeness of any description, photograph or statement contained in this manual. Printed colors and
specifications may vary slightly from product. Products from Musikhaus Kirstein GmbH are only sold through authorized dealer. Distributors and
dealers are not agents of Musikhaus Kirstein GmbH and have no authority to bind Musikhaus Kirstein GmbH legally in any way. This manual is
protected by copyright. Any copying or reprint, even in excerpts, is only allowed with written consent of Musikhaus Kirstein GmbH. The same applies
to reproduction or copying of images, even in altered form.
Musikhaus Kirstein GmbH – Bernbeurenerstr. 11 – 86956 Schongau - Germany