9
Water warning:
• Do not expose the device to rain, use it near water or in damp or wet conditions on it containing liquids which might spill
into any openings. Never insert or remove an electric plug with wet hands.
If you notice any abnormality:
• If the power cord or plug becomes frayed or damaged, or if there is a sudden loss of sound during use of the device, or if
any unusual smells or smoke should appear to be caused by it, immediately turn off the power switch, disconnect the
electric plug from the outlet, and have the device inspected by qualified service personnel.
INSTALLATION
The Showlite PAR64 RGB LED-lighting effect is designed as floor effect or for overhead
rigging on stages, in discotheques, theatres, etc. During installation consider all necessary
safety instructions especially
EN 60598-2-17
and national standards. Please note: for
overhead rigging in public or industrial areas, a series of safety instructions have to be
considered. This manual can only give a survey and does not list complete instructions.
Installation must only be done by authorized and experienced operators.
Overhead rigging
Important! Overhead rigging must only be done by authorized and experienced
operators. Always install an appropriate safety bond.
You must only use safety bonds and quick links complying with DIN 56927, shakles
complying with DIN EN 1677-1 and BGV C1 carbines.All devices must be sufficiently
dimensioned and used correctly in accordance to the latest industrial safety regulations.
The installation oft he device hast o be built and constructed in a way that it can hold 10
times the weight for 1 hour without any harming deformation.
The maximum drop distance must never exceed 20 cm.
A safety bond which already held the strain of a crash or which is defective must not be
used again.
E
N
G
L
I
S
H
2
Bedienungsanleitung
Inhaltsverzeichnis
Vorsichtsmaßnahmen
3
Montage und Inbetriebnahme
4
Netzanschluss und DMX
5
Rückseitige Anschlüsse und Bedienelemente
5
Tastensperre und Bedienermenüs
5
DMX512 Parameter
6
Technische Daten PAR 64 LED RGB
00022051 PAR-64 LED 10mm RGB
00022052 PAR-64 36x3W RGB LED
220/230 V / 50/60 Hz Schaltnetzteil
eingebauter Lüfter
interne Temperaturüberwachung
177 Hochleistungs LEDs 10mm
(R60, B56, G61)
36x3W Hochleistungs LEDs
(R12, B12, G12)
Leistungsaufnahme 50W
Leistungsaufnahme 160W
LED Leistung 20W
LED Leistung 108W
DMX512 (7 Kanäle), manuell, Master/Slave, Audio Mode, Auto Run
D
E
U
T
S
C
H
