10
SYS.
(System)
LEdS
vErS
tESt
(starts test program)
RESt
(Reset to factory setting)
Energy-saving mode On-Off
Display of the version number
Confirm with ENTER
Stand-alone operation
This lighting effect can be operated without an external control unit. Several auto
programs are available for this purpose. These are: Mix, Derby-Show and Strobe-
Show, as well as the possibility of music control. In addition, you will find 18 more
different strobe shows in the Strobe menu. Please refer to the table "Menu
Structure" for the control of the corresponding function modes.
With the help of the "Color" settings, you can create an individual color mixture.
Change the intensity of the individual colors to create the desired effect.
Master-Slave operation
You can control another unit using a master fixture without using an external DMX
controller.
1. Set all units to DMX address d001 and set the subordinate spotlight to SLAVE
mode
Now connect the DMX-Out of the first fixture (master) to the DMX-In of the second
fixture (slave).
All fixtures now follow the settings selected
on the first fixture (master).
Operation with external DMX controller (1-channel mode/ 4-channel
mode)
Select the desired DMX mode in the menu. A four-channel mode for direct control
and a one-channel mode for "remote control" of the internal automation and sound
programs are available for this purpose.
To set the desired DMX addressing, enter the menu and select the first DMX
channel you want to control from the controller. To operate several fuxtures in
parallel, use the same channel assignment for all of them. Please make sure that no
other devices with one or more identical DMX addresses are connected to ensure
error-free operation.