Installation & User’s Manual
SL PAR 155 ZOOM RGBW LED Luminaire
3 0
DMX CONTROL
Sh wline
2. DMX Control Channel Settings
Table 10 provides details regarding control channel operation and settings. The information is applicable to each of
the DMX modes: 16-bit, Enhanced 8-bit, and HSIC.
3. DMX Timing Channel Detail
Timing channel control improves the timed moves of certain groups of parameters. The SL PAR 155 ZOOM RGBW
LED Luminaire provides timing channels in 16-bit mode (one for intensity time and one for color time) and one
timing channel in 8-bit (color and intensity timing combined). The luminaire uses its timing channel value to
calculate a smooth continuous operation for a given time and transition.
Guidelines:
• Timing channels support time values from zero to 60 minutes.
5
Control
0 - 255
0 - 100%
0
Control Channel functions of the SL Series
products. Set control channel value from 0 then
turn to desired action. Hold value for at least 5
seconds. Then restore control channel value to 0
without any scaling.
Default Setting on Console = DMX 0-4
DIM Response_Normal = DMX 5 - 9
DIM Response_Incandescent = DMX 10 - 14
Dimming Curve_Linear = DMX 30 - 34
Dimming Curve_Square = DMX 35- 39
Dimming Curve_S-Curve = DMX 40 - 44
Dimming Curve_PL-Curve = DMX 45 - 49
Calibration_OFF = DMX 70 - 74
Calibration_ON = DMX 75 - 79
Fan_Auto = DMX 80 - 84
Fan_Off = DMX 85 - 89
Reserved ( Future use) = DMX 90 - 250
6
Hue - High Byte
0 - 65535
0 - 100%
0
16-Bit control of Hue 0 - 359 Degrees
7
Hue - Low Byte
8
Saturation
0 - 255
0 - 100%
0
8-bit control for Saturation.
9
Intensity
0 - 255
0 - 100%
0
8-bit control for Intensity.
10
CCT
0 - 255
0 - 100%
0
Variable control of correlated color temperature
(CCT) from:
Channel OFF (disabled) DMX 0 - 5
2700K - 6500K. DMX 6 - 255
Table 15: SL PAR 155 ZOOM RGBW LED Luminaire DMX Channel Mapping (HSIC Mode)
Table 16: DMX Control Channel Settings
Parameter
Description
Dim Response Normal
Fixture LEDs dim with a normal response.
Dim Response Incandescent
Fixture LED's dim with an incandescent emulation response. The response to dimming
commands will be slightly delayed at lower intensities.
Dimming Curve Linear
Applies a linear control of the output of the fixture based on the DMX values on the
Intensity Control Channels. See
Dimming Curve Selection
for additional information.
Dimming Curve Square
Applies a square law control of the output of the fixture based on the DMX values on the
Intensity Control Channels. See
Dimming Curve Selection
for additional information.
Dimming Curve S-Curve
Applies S-Curve control of the output of the fixture based on the DMX values on the
Intensity Control Channels. See
Dimming Curve Selection
for additional information.
Dimming Curve PL-Curve
Applies a dimming curve that follows the Philips Selecon PL series LED Luminaires
control of the output of the fixture based on the DMX values on the Intensity Control
Channels. See
Dimming Curve Selection
for additional information.
Calibration OFF
Toggle Harmonize Color Calibration off. See
Harmonize Color Calibration
for additional
information.
Calibration ON
Toggle Harmonize Color Calibration on. See
Harmonize Color Calibration
for additional
information.
Fan Auto
Fixture fans come on as needed and will still vary in speed, but will not exceed the factory
set minimal noise limit.
Fan Off
Fixture fans will remain off in all circumstances and the fixture will automatically reduce
LED output levels if LED temperatures rise above factory settings.
