manualshive.com logo in svg

Showline SL BAR 720ZT, Installation And User Manual, Page: 38 / 40

Share
Download
Showline SL BAR 720ZT Installation And User Manual Download Page 38

WARNING!

All cleaning should be performed with power completely removed from the luminaire. Never remove

protective covers when luminaire is powered. Wear appropriate protective eye wear and gloves when cleaning the
fixture. All service and maintenance, other than described herein, should be performed by a qualified technician or
Authorized Service Center.

Lint free lens tissue

Lint or powder free gloves

Reagent grade isopropyl alcohol*

A mild soap solution

If the lens is still dirty after using isopropyl alcohol, for instance if figerprints or oil is just redistributed and not
cleaned off the optic, then a mild soap and water solution can be used to gently wash the lens. Repeat the cleaning
with isopropyl alcohol to eliminate streaks and soap residue.

For all other service and maintenance issues, please contact your local Showline office or an Authorized Service
Center.

1. Special Cleaning and Care Insturctions

2. Front Lens Cleaning

3. Service and Maintenance

Being a solid-state fixture, and unlike most fixtures, the SL BAR 720ZT requires very little routine
maintenance by the user. This section covers portions of the luminaire that can be removed for cleaning.

The SL BAR 720ZT special care when it comes to cleaning from lens assembly. Additional care needs to
be taken with the plastic components because they are much easier to scratch or damage than glass.

Note: *Reagent grade isopropyl alcohol is good to use on the SL BAR 720ZT plastic optics with
anti-reflection coatings.

If you have any questions regarding the use or care of your SL BAR 720ZT, please contact Showline technical

support or your local Authorized Dealer.

WARNING! Under no circumstances should ammonia-based cleaners, acetone, or other harsh solvents be used
on or near the SL BAR 720ZT. These types of cleaners or solvents can permanently damage the optics or
housings of the fixture.

Step 1.

Step 2.

Step 3.

Step 4.

Turn Off luminaire and allow to cool completely.

Apply a small amount of reagent grade isopropyl alcohol to lint-free lens tissue.

Wipe all debris, dirt, fingerprints, etc. from lens.

Using a second lint-free lens tissue, wipe off any alcohol residue.

WARNING!

Disassembly ( other than as described herein), alterations, unauthorized service, etc. will void the

product warranty. Contact your local Showline office or an Authorized Service Center for technical support and
service.

CLEANING AND CARE

Installation & User’s Manual

SL BAR 720ZT

36

CLEANING AND CARE

Summary of Contents for SL BAR 720ZT









































Reviews:

No comments