12
Ordercode: 950300
VIBE FX Polar Beat
Power ON/OFF
01)
Move the switch (07) to the left/right, to activate the desired control mode. You will hear a sound
indicating that the device is on.
02)
Move the switch (07) to the center, to switch the Polar Beat off.
Control Modes
1. Auto Mode
01)
Move the switch (07) to the right, to activate Auto mode.
02)
The device will now run the built-in laser show.
2. Sound-controlled Mode
01)
Move the switch (07) to the left, to activate Sound-controlled mode.
02)
The device will now react to the beat of the background music.
3. Bluetooth Mode
While in Auto mode or Sound-controlled mode, using Bluetooth, you can play your own music via the
built-in speaker.
01)
Activate Bluetooth on an external device (e.g. a mobile phone, tablet, etc.) and search for new
Bluetooth devices. The Polar Beat’s Bluetooth name is BLP-200S.
02)
Pair the Polar Beat with the external device. The LED indicator (03) will flash in blue. Once the devices
have been successfully paired, the LED will light in blue and you will hear a sound.
03)
Now, play music by means of your Bluetooth device. It will be audible on the Polar Beat.
Tips For Achieving Maximum Performance
●
Keep the distance between the paired Bluetooth devices as short as possible.
●
Avoid placing the Bluetooth devices near metal surfaces and obstructions.
●
Perform a walk-through before performance or presentation. If dead spots are found, adjust the
location of the Bluetooth devices. If dead spots remain, mark the dead spots and avoid them.
Maintenance
The operator has to make sure that safety-related and machine-technical installations are to be
inspected by an expert after every year in the course of an acceptance test.
The operator has to make sure that safety-related and machine-technical installations are to be
inspected by a skilled person once a year.
The following points have to be considered during the inspection:
01)
All screws used for installing the device or parts of the device have to be tightly connected and
must not be corroded.
02)
There may not be any deformations on housings, fixations and installation spots.
03)
Mechanically moving parts like axles, eyes and others may not show any traces of wearing.
04)
The electric power supply cables must not show any damages or material fatigue.
The VIBE FX Polar Beat requires almost no maintenance. However, you should keep the unit clean.
Otherwise, the fixture’s light output will be significantly reduced. Disconnect the mains power supply, and
then wipe the cover with a damp cloth. Do not immerse in liquid. Wipe lens clean with glass cleaner and
a soft cloth. Do not use alcohol or solvents.
The front lens will require weekly cleaning, as smoke-fluid tends to build up residues, reducing the light
output very quickly.
Please clean internal components once a year with a light brush and vacuum cleaner.
Summary of Contents for VIBE FX Polar Beat
Page 16: ...2017 Showgear...
