Showgear D7674, User Manual

Page: 28 / 32

27
RCA-FSG-18 / RCA-FSG-22 / RCA-FSG-32 / RCA-FSG-42
Product code: D7674 / D7675 / D7676 / D7677
6. Deinstallation, Transportation and Storage
Instructions for Deinstallation
Attention
Heavy object
This product is heavy. Minimum two persons are necessary to disassemble or to move the cabinet.
● Deinstallation must be carried out only by instructed or skilled persons.
● When you remove equipment from the cabinet, start with the top of the cabinet.
● Do not put any equipment on the cabinet.
To deinstall the product, follow the steps below:
Remove the installed equipment from the cabinet. Make sure that you first remove equipment
installed at the top of the cabinet.
Clean the cabinet. See 5.1.1. Basic Cleaning Instructions on page 26.
Disassemble the cabinet. Follow steps 01–28 from 4.4. Assembling the Cabinet on pages 17–23 in
reverse order.
Instructions for Transportation
● Use the original packaging to transport the product, if possible.
● Always observe the handling instructions printed on the outer carton box, for example: “Handle with
care”, “This side up”, “Fragile”.
Storage
● Inspect the product for defects before storing. See 5.1. Preventive Maintenance on page 26 for more
information.
● Clean the product before storing. Follow the cleaning instructions in chapter 5.1.1. Basic Cleaning
Instructions on page 26.
● Store the product in the original packaging, if possible.
7. Disposal
After the product is removed from service all metal parts can be disposed of as scrap.
The plastic and rubber parts of this product shall not be treated as household waste. Dispose of these
plastic and rubber parts by handing it to the respective collection point for recycling. This is to avoid
environmental damage or personal injury due to uncontrolled waste disposal. For more detailed
information about recycling of this product contact the local authorities or the authorized dealer