Showa Denki Mistresa CRG Series Operation Manual & Cautions Download Page 21

12. Warranty

(1) Scope of warranty

In the event of a product failure which occurs within the warranty 

period, repairs shall be made free of charge, provided that the product 

was used in accordance with the instructions given in the operation 

manual, and on the product labels.

In the event that the customer has installed this product in other existing 

equipment, this warranty does not cover the cost of removing and 

re-installing this product from and to that equipment. Nor does this 

warranty cover costs for work and transport, etc., which are associated 

with those procedures. Moreover, customer losses related to equipment 

and operation, and any other indirect losses are also outside the scope of 

this warranty.

(2) Warranty period

This warranty shall extend for a period of 12 months from the date of 

delivery.

(3) As a general rule, a repair fee shall be charged under the following 

circumstances, even if still under warranty.

① 

When a product failure or damage was caused by incorrect product 

handling (failure to observe the operation manual instructions and 

affixed label information), or by unauthorized repairs or 

modifications.

② 

When a product failure or damage was caused by transport or 

dropping, etc., after the product has been purchased.

③ 

When a product failure or damage was caused by a natural disaster 

such as a fire, earthquake, storm/flood, lightning, etc., or by 

abnormal voltage, or usage with an incorrect power supply (voltage, 

frequency), etc.

④ 

When a product failure or damage was caused by repairs or 

modifications (new holes drilled in the product, etc.) by any party 

other than Showa Denki.

− 19 −

Summary of Contents for Mistresa CRG Series

























Reviews: