− 16 −
(3) Filter replacement procedure
Be sure to verify that
the power switch is OFF
before beginning the
filter replacement procedure. During the replacement procedure, place a
placard on the power switch which says
"Maintenance In Progress.
Do not turn the power switch ON"
.
①
CRD-H Series, CRH-H Series
Primary and secondary filter replacement
(These filters can be reused after being washed)
Release the clamps and open
the filter cover.
1
Use care to avoid contact with
the clogging status indicator and
terminal box when opening the
cover.
2
【
CAUTION
】
Remove the filter by sliding the
filter box out.
3
If cutting chips and dust have
accumulated in the dust case,
remove the dust case and
discard its contents.
4
Push filter frame "B" upward,
then pull it forward ( ) and
detach it ( ).
5
1
2
1
2
