background image

  

- 1 - 

 

  Chapter 1  Cautions for safety 

 

 

WARNING 

 

 

Any Dustrésa must not suck the following things: 
 

 a lit cigarette or match, hot dust 

 

sparks

 from a sander, a grinder, etc. 

Combustible filter cloth of the dust collector can ignite and cause a fire. 

 

 flammable gases from petrol, thinner, etc. 

Sparks from the incorporated electric components, static and contact of metals can cause an 
explosion. 

 

 dust of aluminium, carbon and starch 

It can cause a dust explosion. 

 

 

Do not operate the Dustrésa with its maintenance door opened because it could be closed by 
negative pressure inside catching your fingers and/or the motor overloaded. 

 

 

Caution 

 

 

The Dustrésa should not suck the following things which can cause it a failure: 
 

 Hot gas 

The gas heated to 40

C or more would deteriorate the insulation of electric components inside 

the dust collector. 

 

 Water, oil, adhesives and adhesive dust 

They would deposit on the filter cloth causing it blinding. 

 

 Work, tools and 

other solid objects than dust 

They could damage the ducts and filter cloth. 

 

 

Particulates

 (5 µ or smaller) of carbon and other materials 

Use a high-performance filter cloth as the standard type can allow leaks. 

 

 

Lightweight dust

 including feather, cotton dust, paper dust, polystyrene foam dust 

They would adhere to the inside of the dust collector. 

 

 

Do not ride on the Dustrésa because it could be deformed or you could fall. 
 
 

 

Do not apply high pressure on the Dustrésa with a pressurizer. 
 
 

 

Never increase the operation speed more than design speed using an inverter because it could 
damage the incorporated blower. 

Summary of Contents for Dustresa CFA-110















Reviews: