PUBLIC ADDRESS
AMPLIFIER
6
(3) AUX / INPUT knob
(4) MIC1-2 INPUTS
(5) EQ TONE
(6) MP3 MODULE
(1) POWER LIGHT
Apply 6.3mm unbalanced MIC jack. They are connected to microphones.
Those knobs are used to adjust the TONE.
It lights up when switching power on, and it goes out when switching power off.
CONTROL ELEMENTS
1. FRONT PANEL
Take
for an example
PA-20M/PA-20HM
(7)
(2)
(5)
(1)
(4)
(2) MIC 1-2 VOL knobs
Play MP3 files through USB port
The MIC1 jack is controled by the MIC1 knob. And the MIC2 jack is controled by the MIC2 knob.
AUX knob can control the below parts:
3.5mm AUX
jack
2 RCA jacks
INPUT
(3)
(6)
(7) SIREN SWITCH
The alarm will sound when press in the switch and it will stop when the switch pop-up
9
(1) USB Port
(2) PAIR
(3) Status Light:This LED indicates the PA-20B'sBluetooth pairing status:
It only supports 5V power charge, not for audio transmission.
Long press this button for 5 seconds to make BT4.0 avaliable for pairing to a nearby
Bluetooth device or removing connected device.
Flashing slowly (approximately twice every 2 seconds): BT4.0 is not paired to a Bluetooth device.
Flashing quickly (approximately twice per second): BT4.0 can be paired to a Bluetooth device.
Solidly lit: BT4.0 is paired to a Bluetooth device.
See Operation to learn how to pair/unpair a Bluetooth device to/from PA-20B/PA-20HB.
2.Bluetooth
Operation
Important:
You can play audio from an audio device that sends its signal over a Bluetooth connection (e.g.,
smartphones, tablet computers, etc.). BT4.0 uses Bluetooth CSR 4.0 and has range of up to 30
feet (10 meters).
Once you "pair your Bluetooth device with BT4.0, they are "connected wirelessly. You can play
audio on your Bluetooth device, and it will be sent out of BT4.0's SPEAKERS output.
BT4.0 will not receive audio from a phone call. While using it, we recommend disabling your
cellular connection, if possible.
Do not use BT4.0 near a microwave oven, which can interfere with the reception.
While PA-20B/PA-20HB is paired with a Bluetooth device, over Bluetooth devices cannot pair to it.
You must unpair ("disconnect") the current Bluetooth device from BT4.0 to make it available
others.
"
"
(2)
(1)
(3)
PA-20M