Show Tec Shogun 3D+RGB, User Manual

Page: 2 / 9

ATTENTION
Warning
1. Must operate according to the user manual. Don't separate the light personally.
Call the technician when the machine breaks down.
2. Please do not see the laser beam directly to avoid any damage.
3. Before connect or disconnect the power, please adjust the luminance of the
laser diode to the least to avoid any damage to the laser diode.
4 . This unit should be keep dry, do not use in the rain or dank and dusty
environment. It can be use in the outdoor with the water-proof cover protector.
5. Set the light immobility and try to avoid strong shake or hit.
6. Prevent dust into the equipment to avoid problems.
7. Please keep that there's no other equipment or decorating materials obstructed
the exhaust fan and the vent-pipe when the equipment was working.
8. Before connect power, check the plug is immobility or not, power line should
be connect well.
9. Please do not open or close the equipment frequently that's to avoid any affect
to the life span of the laser diode, and try the best to avoid the long time
working.
10. Due to the characteristic of the laser diode, after three hours working, it
should be close at least 25 minutes until the laser diode cooling then work
again.
11. Don't touch the light or draw the power line when your hand was wet. And do
not pull the electronic power line.
12. Maintain the distance at least 10M above from the equipment to the object.
13. This equipment does not have any parts can repair for the users, please do not
open the equipment.
14. When the laser diode became dim or damaged please contact the dealer timely.
15. To use the original package when transport again and to avoid shake.
16. When use this equipment, you must turn on the lamp at first and then start the
computer .If you open software before turn on the lamp, please restart the
software.
Don't look the light directly to prevent make some destroy with eyes..
2 Keep the space between light equipments and the lighted things more than 10 M.
1
、
、