7.
Attach cow: Following the included drawing, attach cow to slide tubes on
kevlar cable and tech line.
8.
Operate system: Take a minute to experiment with the system. Turn speed
dial on control box to "30". Attach remote control to your wrist, and
fingerplate on your index (pointer) finger. Using your thumb to operate
buttons, move cow end to end. Make any adjustments (tighten rope, adjust
Tech line, etc). Once comfortable with the controls, you are ready to
introduce your horse to the Pro Cutter. We recommend working at slow
speeds until both horse and rider are acclimated.
ADDITIONAL FEATURES:
* Soft-start acceleration: Progressive acceleration ramp
* Superior radio system: Better range, less interference.
* Large drive system: Heavy-duty industrial components
* Weather-tight NEMA enclosure
* Climate control system
*Dynamic braking
Thank you for choosing............
SHOW PRO INDUSTRIES
P.O. Box 1235, Springtown, TX 76082 / (817)523-4055 / (817)220-5117 fax
email: [email protected] / www.procutter.com
