background image

E N  

 

 

Nome file:

File name:

7528002EN - ISTRUZIONI WP7.8000 - EN.docx 

Rev. 1 24/05/2016 

12-18 

 

 

Fig. 21 

 

Fig. 22 

5.7  Reinstallation and reuse. 

  Clean the product and the moving parts accurately before stopping the product for a while, such as, for 

instance, during the winter months. 

  Do not lubricate and/or use detergents and chemical cleaning products. 
  If  there  is  the  risk  of  freezing,  the  product  must  be  carefully  emptied  from  the  liquids  in  its  hydraulic 

circuit. It is advisable to empty all the hydraulic parts
5.8  Demolition and disposal. 
Collecting recyclable material, both those used for packaging (cardboard, nylon, 
etc.)  and  those  replaced  during  maintenance  is  recommended.  Suitable 
collection  of  waste  material  for  recycling,  processing  and  environmentally 
compatible  disposal  contributes  in  avoiding  possible  negative  effects  on  the 
environment  and  health  and  promotes  the  reuse  and/or  recycling  of  product 
materials. 

  Illicit product disposal by the user may be punishable by current international 

and/or national laws. 

  Electric/electronic waste disposal. 

 

EU  directive  2012/19/EU  classifies  this  product  as  an  electrical  or 
electronic  tool.  The  barred  bin  symbol  on  the  equipment  or  packaging  indicates  that  the  product 
must  be  separated  from  other  waste  at  the  end  of  its  working  life.  Therefore,  the  user  must  take 
equipment to electronic and electro-technical waste collection centres at the end of its working life 
or return it to the dealer when purchasing similar new equipment, on a one to one basis. Suitable 
collection of decommissioned equipment for recycling, processing and environmentally compatible 
disposal  contributes  in  avoiding  possible  negative  effects  on  the  environment  and  health  and 
promote the reuse and/or recycling of device materials. Illicit product disposal by the user may be 
punishable by current national laws. 

 

  Do not use glue, sealant or other chemical products on threads or other product parts. 
  To disconnect the product from the power mains, remove the power plug from the power outlet without 

pulling on the power cord. 
6.1  Operating description. 
The  product  you  purchase  is  designed  to  move  water  in  swimming  pool.  The  rotor  turns  and  transfers 
water from the inlet to the outlet
6.2  Application range. 

  The product cannot be used to purify water for human consumption. 

This powerful and reliable product can be used in swimming pool, together with a filter, for water treatment. 
6.3  Use. 

  Cutting and/or altering the power cord is strictly prohibited. 
  The product cannot be used to purify water for human consumption. 
  The product cannot be used to purify liquids other than fresh water. 

The product cannot be used for medical/therapeutic purposes, 

  Dry operations are prohibited. 

 

Fig. 23 

Summary of Contents for WP7000



















Reviews: