DETAIL A
DETAIL A
DETAIL B
DETAIL B
A
B
111"
STEP 3
Slide one Blue Cap 20 on each end of the Slide Ladder Base - as shown in
Detail "A."
Measure 111" from the Deck mount Plate and make a mark on the dock - as
shown in Detail "B."
Lay the Slide Ladder Base flush with the mark and in line with the Deck Mount
Plate. Make a mark on the dock at each hole. Move the base and drill a 7/16"
hole at each mark - as shown.
Secure Slide Ladder Base to dock with 3/8" diameter hardware in four places.
Slide Ladder Base
Deck Mount Plate
Slide Ladder Mount
Blue Cap 20
STEP 4
Attach the Slide Ladder to the Slide Ladder Base with two
Bolts 3/8 x 1.25, four Washers Flat 3/8, two Washers Lock
3/8, and two Nuts 3/8 Brass - as shown in Detail "A."
Attach the Poly Slide to the Deck Mount Plate with six Pan
Screws 1/4 x .75 - as shown in Detail "B"
CAUTION
Secure with four connection bolts and
locking hardware(lock nuts, lock washers,
etc.), not provided. Failure to do so could
results in serious injury or death.
Poly Slide
Deck Mount Plate
Pan Screw
1/4 x .75
4