SHOREMASTER.COM
SWIm RAftS
Attach Anchor Ring
Step 1.
One end of the 15' rope is threaded through the cone shaped thru-hole in the raft from the bottom
up through the top. Next thread the rope through the rubber cone and tie a couple knots so the rope will not
pull through the cone.
Step 2.
The Anchor Ring is then threaded on the 15' rope.
Step 3.
The loose end of the rope is then attached in the same manner as the other end to the other side
of the raft through the second rubber cone.
Step 4.
The anchor rope is attached to the Anchor Ring. The purchaser provides the anchor rope and the
anchor. Anchor rope should be rope and not chain.
The anchor tie downs should not be used to pull the raft through the water behind a boat or
onto shore. If the raft is exposed to heavy or continuous wave action, a rope snubber should be added to
the anchoring line to help absorb the shocks.
Never jump or dive into the water before the entire subsurface area has been checked for
depth. Consult local authorities for ordinances regarding proper placement and anchoring of swim raft.
Manufacturer recommends removing swim raft from water when not in use.
ALWAYS PUT SAFETY
FIRST!
Rubber Anchor Hold
Poly
Swim
Raft
15' Rope
Anchor Ring
Drain Plug
Anchor Rope
(Not Included)
