15
STEP 3:
Use one (1) of the Phillips screws, one
(1) Flat Washer, Quick Release Pin
Assembly, and one (1) Nylon Standoff
Spacer to secure the door stop side of
Door. See FIGURE 2.33
The screw is threaded into the Male
Flange and does NOT go through the
Door.
The short Nylon Spacers are used for the
Kat Portal and the long Nylon Spacers are
used for the Puppy Portals.
Refer to the parts list (FIGURE 1.2) for hardware
assembly order.
STEP 4:
With the Door in the closed position,
paw down, the Quick Release Pin can
be inserted into the hole to secure the
Door closed. See FIGURE 2.34
STEP 5:
Thoroughly clean both Cages and the Portal to ensure the removal of all
chemicals and metal shavings before allowing the Cages to become occupied.
STEP 6:
Reattach the Cage Doors.
FIGURE 2.34 - Secure Door
FIGURE 2.33 - Quick Release Assembly
SECTION TWO
