Page 7
330002
Dust Collector
General Information
Dust Collector Attachment Kit:
10.
Two Hoses
- Connect to the 3-way inlet.
11.
Two Inlet Plug Assemblies
- Placed in
the 3-way inlet port(s) that are not in use.
12.
Two Extension Wands
13.
Floor Pickup
14.
Elbow Brush
15.
Reducer
-
Allows you to connect the Shopsmith
Mark V Model 500 (sold separately).
16.
Utility Pickup
Specifications
The Dust Collector’s specifications will give
you an idea of its capabilities.
Bag: _________ 30 gallon capacity
Motor: _______ 1/2 hp industrial-duty ca-
pacitor start.
Power Cord: __ 12' long
Airflow: ______ 330 cfm
Dimensions: __ 21" wide x 26" long x 48" high
Weight: ______ approximately 64 pounds
Figure 3
Terms to Know
The main parts of the Dust Collector are:
1.
Bag
- A heavy duty, disposable, 30-gal-
lon, 4 mil., clear plastic bag.
2.
3-Way Inlet
- Allows the hookup of one
2-1/2" diameter hose, or you can use two
or three hoses simultaneously.
3.
Filter Hood
- Filters dust particles out of
the air and returns dustfree air to the
room. An adjustable retaining strap se-
cures it to the main housing.
4.
Rear Handle
- Easily accessible for move-
ment of the unit.
5.
Power Switch
- A rocker type on/off
switch with an internal dust seal for extra
safety.
6.
Main Housing Assembly
- Contains the
motor and blower assembly.
7.
Bag Clips
- Three clips hold the bag
while the retaining strap is being attached.
8.
Retaining Strap
- Secures the bag to the
main housing.
9.
Base Pan
- Supports the unit. Two front
casters and two rear wheels are attached
for easy mobility.
