Disassembly & Assembly
Warning: We advise caution when disassembling and lifting items. You
must ensure that the person undertaking the action is able to safely and
correctly handle the weight to avoid any personal injury.
Ensure that the power is switched off and the joystick is dis-connected
before dismantling.
Method:
Step 1:
Unplug the joystick and remove the seat assembly mentioned previously.
Step 2:
Remove the battery pack by pulling back on the red release lever located
under the seat in front of the battery pack. The battery pack can be lifted out
from the rear of the powerchair.
Take care when lifting the battery pack.
Assembly is the reverse of the above procedure.
Storage and Use
We recommend that your powerchair is stored in a dry environment,
preferably covered and away from extremes of temperature and humidity.
Avoid using the powerchair in rain or snow wherever possible and avoid
leaving the powerchair in damp environments such as shower/bath rooms.
Patient Transfer
Assistance maybe required depending on the limitations of the
user.
The powerchair must be turned off before transferring
in or out of it.
Place the footplate in the up position to enable the user to place
their feet firmly on the floor and rise up from the seat.
(Never
stand on the footplate, as this will cause the powerchair to
become unstable.)
The armrest should only be used as a support and not a lever to transfer from
the powerchair. To make a side transfer flip the armrest down out of the way
and slide off the seat. In all these movements please seek assistance.
11
Summary of Contents for Vienna S-UL7
Page 18: ...Notes 18 ...
Page 19: ...Notes 19 ...
