8/12/2004
8
Seat Height Adjustment (Fig 5)
Remove seat as described (fig 4). Loosen the lower
hand knob and remove seat post. The seat height
can be adjusted to two different settings by inserting
the steel locking pin in the desired hole. Replace
the seat post, tighten the lower hand knob and
replace the seat. Tighten the seat knob.
Armrest Width Adjustments (Fig 6)
On the underside back of the seat there are two
arm rest hand knobs, one on each side. Turn
hand knobs counterclockwise to loosen.
Loosening the arm rest hand knob allows the
armrest width to be adjusted or arm rest to be
removed. Once the desired positions of the arm
rests are set, tighten the hand knobs by turning
clockwise to lock the arm rests into place.
Armrest Adjustments (Fig 6)
The arm rests are hinged at the bottom and can
be pushed down and out of the way for sideways
transfer. Pull arm rest up the push arm rest
forward and down.
Lower
Hand
Knob
Steel
Locking
Pin
Figure 5
Seat
Post
Adjustment
Holes
Figure 6
Arm Rest
Hand Knob
1) Pull Up
2) Push Forward
& Down
