background image

 

 

ontinued….. 

C

  
For maximum stability the speed setting should be set up to 50% of the 

he main factors affecting stability are: 

ent 

es 

lease keep your speed to a level where you can safely stop without having 

he back of the seat as this will affect the centre of 

 the product, especially whilst moving. 

mergency Procedures   

 erratically or become unresponsive whilst driving, 

ote: Switching the power off at the key / switch can cause the scooter to stop 

                  

riving in Pedestrian Areas 

n using the scooter in pedestrian areas always 

maximum available (halfway between the tortoise and the hare or just 
entering the red sector on the speed indicator depending on the model. 

 
T

• 

Maximum speed setting 

• 

Seat height 

• 

User movem

• 

User’s manoeuvr

• 

Gradients or slopes 

 
P
to make any erratic turns. 
Do not load bags etc. on t
gravity and could increase instability. 
Do not lean outside of the ‘footprint’ of
Avoid making turns on gradients or slopes. 
 
 

E

Should your scooter behave
release the wig-wag lever so it may return to it’s neutral position and switch off 
the power at the key / switch. These procedures will stop the scooter and 
activate the braking system, preventing any further uncontrolled manoeuvres. 
 

N
abruptly and should only be used to stop the scooter during an emergency.       

 

D

As mentioned previously, whe
lower your maximum speed to that of the pedestrians around you. Remember 
the stopping distance of your scooter and always allow enough space to stop 
safely to avoid collisions with pedestrians or other objects. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

15

Summary of Contents for Perrero S-888SLR

















Reviews: