Free Wheel Mode
Free-wheeling is used when you want to move your unit without riding on it.
If for reasons of convenience you need to free wheel your scooter please follow the
instructions below.
To disengage the electromagnetic brake:
1. Turn the key switch to the off position and
remove the key.
2. Pull up on the YELLOW free-wheel lever located
underneath the rear shroud, just above the back
left wheel.
You can easily get to it without having to take the seat
and rear cover off. When you are done moving your
scooter always remember to push down on the
YELLOW lever again to engage the brake.
Caution Notes:
Never sit on your scooter with the free-wheel in the disengaged position. When the free
wheel device is disengaged, you do not have braking function. Do not park your scooter
on a slope with the free wheel disengaged.
If your scooter is in the free-wheel mode, when you depress the speed control you will not
be able to move under motor power. Depress the free-wheel switch once again. You will
hear a clicking sound of the brakes being re-applied to be able to start driving your
scooter.
General: If you are able to push your scooter, the free-wheel switch is on and the
electromagnetic brakes are disengaged. Please check once more the above-mentioned
procedure for re-engaging the drive.
11
Summary of Contents for GK10
Page 1: ...GK10 Instruction Manual ...
