Continued…..
Armrest Angle Adjustment (Fig. 3)
Flip up the armrests to allow access to the
adjustment screw and locknut. Unscrew the
locknut and screw the bolt in or out to achieve the
desired angle and re-tighten the locknut.
The scooter will be delivered with the arms parallel
to the floor.
Seat Height Adjustment (Fig. 4)
To adjust the height of the seat,
undo the seat-tightening knob
under the front of the seat.
Pull the swivel adjustment lever
(Fig. 2)
upwards and at the same
time lift the seat from the adaptor.
Remove the seat height-locating
pin and set the seat to the desired
height and reset the locking pin.
Reverse the above instruction to
replace the seat and re-tighten the
hand knob.
The higher the seat is adjusted,
the more stability may be affected due to the higher centre of gravity.
Note: If removing the armrests for transport, ensure that the knobs are
re-tightened to avoid them rattling loose and falling out.
Do not apply full body weight to the armrests for transferring. Pivot the
seat or lift the arm up out of the way to transfer to another seat.
Fig 3
Fig 4
Angle
Adjustment
Screw
7
Summary of Contents for Deluxe S-889NR
Page 18: ...Notes 18 ...
Page 19: ...Notes 19 ...
