Shoprider Capri S787M, User Manual

Page: 6 / 16

Adjustments
Tiller Angle Adjustment
At the base of the tiller is a round knob. Turn
the knob anti-clockwise to
loosen the tiller.
Select the desired tiller angle and re-tighten
the knob until securely in place.
Folding the Tiller Assembly
(For transport purposes)
Loosen the tiller angle adjustment knob and fully fold the tiller into the base
and retighten the knob.
Lock the tiller assembly into place by lifting the yellow tiller lock lever up and
to the left.
The tiller can only be locked when the front wheel is pointing
straight ahead. Do not carry the scooter by the tiller stem.
Seat Removal
To remove the seat, fold down the
back of the seat. Undo the seat
release handknob a few turns and lift
the seat away from the seat stem.
Seat Height Adjustment (2 position)
Remove the seat as previously
described. Undo the height adjustment
lever a few turns and remove seat
stem. Pull the height setting pin out of
the chassis and set the seat post up or
down to the desired height and
relocate the setting pin through the hole. Replace the seat and ensure the
handknob and height adjustment lever are retightened.
The higher the seat is adjusted; stability may be affected due to the
higher centre of gravity.
6