Shoprider 888SL, Owner'S Manual, Page: 6 / 20

Page -6-
or dampness could cause the scooter to electrically malfunction and prematurely rust.
• Do not lean against or pull forward on the tiller while mounting or dismounting the scooter. Other -
wise, injury may occur.
• Do not operate the unit or turn the key on while charging.
• Whenever a center bolt of the wheel assembly has been loosened, please replace a specified
new bolt from authorized dealers and secure with a torque of 240 ± 5 kg-cm together with Loctite
271 adhesive (or equivalent).
• Charge batteries daily after use.
• Charging plug has to be removed from the scooter after charging.
• Battery cables must be securely fastened onto battery terminals by the authorized dealers before
using the unit.
• Batteries must be tied down correctly and securely.
• Any loose cable can not be allowed when the unit is driving.
• Must check the battery charge remained before operating the unit.
• Always charge the batteries of the unit in a well ventilated area.
• If the unit went over or sank into deep water, please switch off power of the unit and consult with
your authorized dealer for help right away.
• Switch off power of the unit while not in use or before charging, removing and installing the bat -
teries. Otherwise, injury and/or damage to the unit or surrounding property may occur.
• Do not operate the unit in the way of exceeding to the product’s specification listed in this own -
er’s manual.
• Do not use the thumb/finger lever before the key switch is turned on, or the operation will be pro -
hibited until to turn key switch off and then on.