Shoprider 6Runner 10 User Manual Download Page 12 | Manualshive

Page: 12 / 28

Shoprider 6Runner 10 User Manual Download Page 12

12

Maximum Speed Indicator (6)

This is a 5-segment display, which indicates the maximum speed setting selected.

Attendant Control LED (7) for Shark Joystick

When the Attendant Remote is activated, the ACU LED will light up and remain lit until
the attendant switches back to user mode.

Service Indicator LED (8) for Shark Joystick

The amber Service Indicator LED is dedicated to displaying joystick Flash Codes. For a
list of Flash Codes and what faults they indicate. Refer to Table 2 for more details.

Joystick (9)

This controls the speed and direction of the Powerchair. Push the joystick in the
direction you want to go. The further you push it, the faster the speed will be. Releasing
the joystick will automatically engage brakes and stop the Powerchair.

Charging Port (10) for Off-Board Charger

Only plug a Shoprider certified charger into this port. This port should not be used as a
power supply for any other electrical devices. Disregarding this will void the warranty of
the Powerchair.

«
...
10
11
12
13
14
...
»

Summary of Contents for 6Runner 10





























Reviews:

No comments