ASSEMBLY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE YOU BEGIN. DO NOT JUMP AHEAD OF ANY STEP.
shopPOPdisplays makes no claim that these assembly instructions cover all details, conditions or variations, or that they cover all possible contingencies in connection with the assembly or installation of
this product. It is the Purchaser's responsibility to ensure that all components of this product are properly assembled and installed in accordance with these instructions. shopPOPdisplays assumes no
obligation or liability on account of any third-party recommendations, opinions or advice as to the assembly or installation of this product.
page
2
of
2
Cubicle Wall Extender
O
P
Q
ASSEMBLY COMPLETED
13520 / 13521 / 13522
13523 / 13524 / 13525
STEP 6:
Guide your additional Cubicle Wall Extender down over cubicle wall and then align with
open end of Flexible Connector. Connect units together by inserting edge of Panel into Connector.
STEP 5:
To connect
multiple Cubicle Wall
Extenders together, use
the supplied Flexible
connector and attach
one half to the open side
edge of installed unit.
Make sure when installing
to start below the radiused
corners of the clear panel.
To attach multiple units together at a 90
degree corner, use Flexible Connector and
attach same as before, making sure hinge
is to the outside.
HINGE ON OUTSIDE
INCORRECT
