EXTENSION CORDS
NOTE:
STATIC SHOCKS ARE COMMON IN DRY AREAS OR WHEN THE RELATIVE HUMIDITY OF THE AIR IS LOW. THIS IS ONLY TEMPORARY AND
DOES NOT AFFECT THE USE OF THE APPLIANCE. TO REDUCE THE FREQUENCY OF STATIC SHOCKS IN YOUR HOME, THE BEST REMEDY
IS TO ADD MOISTURE TO THE AIR WITH A CONSOLE OR INSTALLED HUMIDIFIER.
Use only a cord extension set that complies with AS3199. Conductor size must be 1.0mm
2
for length up to 25 metres and 1.5mm
2
for length
from 25 - 32 metres.
UNPACKING AND SET-UP
REAR WHEEL DOLLY/TOOL HOLDER AND FRONT CASTER FEET ASSEMBLY
Remove tank cover and any accessories which may have been
shipped in the tank.
Before replacing tank cover, please refer to DRY PICK UP or WET
PICK UP OPERATION in this manual to ensure you have the proper
filters installed for your cleaning operation.
Replace tank cover.
Slip cleaner end of flexible hose into the intake port.
1.
2.
3.
4.
Attach the extension wands to the accessory end of the hose.
Twist slightly to tighten the connection.
Attach one of the cleaning accessories (depending on your
cleaning requirements) to the extension wand. Twist slightly to
tighten the connection.
Plug the cord into the wall outlet. Your cleaner is ready for use.
I = ON O = OFF
5.
6.
7.
LIMITED TWO-YEAR WARRANTY
Shop-Vac warrants the vacuum cleaner for two years from the date of purchase to correct by repair or parts replacement without charge, any
product defect due to faulty material or workmanship provided that the vacuum cleaner is not used for rental service. This warranty does not
cover accessories. Simply return the complete unit, with a copy of the receipt, to the place where you purchased your vacuum cleaner. Shop-Vac
assumes no responsibility for damage or faulty performance caused by misuse or careless handling, or where repairs have been made or
attempted by others. Proof of purchase date is required. This warranty gives you specific legal rights, and you may also have other rights which
vary from state to state. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a
replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have
the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
GROUNDING INSTRUCTIONS
ELECTRIC SHOCK. CHECK WITH A
QUALIFIED ELECTRICIAN OR
SERVICE PERSON IF YOU ARE IN
DOUBT AS TO WHETHER THE
OUTLET IS PROPERLY GROUNDED.
DO NOT MODIFY THE PLUG
PROVIDED WITH THE APPLIANCE –
IF IT WILL NOT FIT THE OUTLET,
HAVE A PROPER OUTLET
INSTALLED BY A QUALIFIED ELECTRICIAN
.
This appliance must be grounded. If it should malfunction or
breakdown, grounding provides a path of least resistance for electric
current to reduce the risk of electric shock. This appliance is
equipped with a cord having an equipment-grounding conductor and
grounding plug. The plug must be inserted into an appropriate outlet
that is properly installed and grounded in accordance with all local
codes and ordinances. This appliance is for use on a nominal
240-volt circuit, and has a grounded plug that looks like the plug
illustrated in
sketch A
.
WARNING
–
IMPROPER CONNECTION OF THE
EQUIPMENT-GROUNDING CONDUCTOR CAN RESULT IN A RISK OF
NOTE:
If power cord needs to be replaced, use only a Shop-Vac
Service Agent.
Grounded
Outlet
Grounding
pin
(A)
You will find two casters
(a),
two large rear wheels
(b),
one axle
(c),
rear dolly/basket
(d),
two caster feet
(e)
and four screws with your wet/dry
vacuum. Assemble as follows:
e
d
a
b
c
