-16-
Model W1843 (For Machines Mfd. Since 3/17)
SE
TU
P
Bench.Mounting
Number.of.Mounting.Holes................................... 8
Diameter.of.Mounting.Hardware.Needed...............
1
⁄
2
"
Machine Base
Workbench
Bolt
Flat Washer
Flat Washer
Lock Washer
Hex Nut
Figure.5.
Typical "Through Mount" setup.
Machine Base
Workbench
Lag Screw
Flat Washer
Figure.6.
Typical "Direct Mount" setup.
Another option is a “Direct Mount” (see example) where
the machine is secured directly to the workbench with lag
screws and washers.
The base of this machine has mounting holes that allow it
to be fastened to a workbench or other mounting surface
to prevent it from moving during operation and causing
accidental injury or damage.
The strongest mounting option is a “Through Mount” (see
example) where holes are drilled all the way through the
workbench—and hex bolts, washers, and hex nuts are
used to secure the machine in place.
