Shop fox W1741H Manual Download Page 21

Page: 21 / 95

Model W1741/W1741S

***IMPORTANT UPDATE***

Applies to Models Mfd. Since 4/14

and Owner's Manual February, 2006

Phone #: (360) 734-3482 • Tech Support: [email protected] • Web: www.shopfox.biz

The following changes were made to these machines since the owner's manual was printed:

• Certified as meeting CSA 22.2 #71.2-8 and UL 987-7th standards.

• Changed the motor nominal voltage from 220V to 240V, and motor amperage from 18A to 15A.

• Changed full-load current rating from 18A to 15A.

• Added a power cord with a 6-20 plug.

• Bolted the motor to the inside of the stand for shipping purposes.

• Replaced the motor and cutterhead pulleys with aluminum versions designed for ribbed V-belts.

• Replaced the V-belt with a ribbed V-belt.

This document provides relevant updates to portions of the owner's manual that no longer apply and

additional information required by CSA—aside from this information, all other content in the owner's

manual applies and MUST be read and understood for your own safety.

IMPORTANT: Keep this update

with the owner's manual for future reference

If you have any further questions, contact our Technical

Support.

WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT

THE WRITTEN APPROVAL OF WOODSTOCK INTERNATIONAL, INC.

#15234BLTS Printed in China

Changed Specifications

Electrical

Power Requirement ...................................................................240V, Single-Phase, 60 Hz

Motor

Voltage ........................................................................................................... 240V

Amps ............................................................................................................... 15A

Operation Info

Cutterhead Speed ........................................................................................ 4800 RPM

New/Revised Parts

312V2

28-2

28-1

28-4

28-5

28-3

28-6

(W1741) (W1741S)

35-6V2

28-7

28-8

28-9

28-10 28-11

170V2

24V2

25V2

Motor: 3 HP, 240V, 1-Ph, 60 Hz, 15A
Cutterhead: 4-Knife, 3-3/16” Dia.
Knife SIze: 8” x 3/4” x 1/8”
Maximum Depth of Cut: 1/8"
Maximum Rabbeting Depth: 5/8"
Cutterhead Speed: 5350 RPM
Cuts Per Minute: 21,400
Fence Tilt: 45º, 90º, 135º
Table Size: 8" x 76-5/16"
Weight: 510 lbs.

Specifications

To reduce the risk of serious injury when using this machine:

1. Read & understand owner’s manual before operating.
2. Always wear approved eye protection and respirator.
3. Except when rabbeting, keep all guards in place and in proper
    operating condition. Always replace the guard after rabbeting.
4. Never perform jointing, planing, or rabbeting cuts on pieces
    smaller than 8" long, 3/4" wide, or 1/4" thick.
5. Always use push blocks when face planing.
6. Keep hands at least 12" away from cutterhead.
7. Never cut deeper than 1/8" on a single pass.
8. Do not wear loose clothing, gloves, jewelry, or other items that
    can get entangled. Tie back long hair and roll up sleeves.
9. Turn motor OFF and disconnect power before changing blades,
    adjusting tables/fence, or servicing.
10. Be aware of "kickback" hazards and know how to prevent them.
11. Do not joint boards with cracks, loose knots, or any defects.
12. Only operate in a dry environment free of rain or dampness.
13. Always support the workpiece against the fence and table. Never
    attempt any operation free-handed.
14. Prevent unauthorized use by children or untrained users;
    restrict access or disable machine when unattended.

Manufactured for Woodstock in China

Date

Serial #

208624

MODEL W1741

8" x 76" 4-KNIFE CUTTERHEAD

PARALLELOGRAM JOINTER

Motor: 3 HP, 240V, 1-Ph, 60 Hz, 15A
Cutterhead: Spiral w/Indexable Inserts
Number of Inserts: 40
Replacement Inserts: D4018
Maximum Depth of Cut: 1/8"
Maximum Rabbeting Depth: 5/8"
Cutterhead Speed: 4800 RPM
Cuts Per Minute: 21,400
Fence Tilt: 45º, 90º, 135º
Table Size: 8" x 76-3/8"
Weight: 508 lbs.

Specifications

To reduce the risk of serious injury when using this machine:

1.  Read & understand owner’s manual before operating.
2. Always wear approved eye protection and respirator.
3. Except when rabbeting, keep all guards in place and in proper
    operating condition. Always replace the guard after rabbeting.
4. Never perform jointing, planing, or rabbeting cuts on pieces
    smaller than 8" long, 3/4" wide, or 1/4" thick.
5. Always use push blocks when face planing.
6. Keep hands at least 12" away from cutterhead.
7. Never cut deeper than 1/8" on a single pass.
8. Do not wear loose clothing, gloves, jewelry, or other items that
    can get entangled. Tie back long hair and roll up sleeves.
9. Turn motor OFF and disconnect power before changing inserts,
    adjusting tables/fence, or servicing.
10. Be aware of "kickback" hazards and know how to prevent them.
11. Do not joint boards with cracks, loose knots, or any defects.
12. Only operate in a dry environment free of rain or dampness.
13. Always support the workpiece against the fence and table. Never
    attempt any operation free-handed.
14. Prevent unauthorized use by children or untrained users;
    restrict access or disable machine when unattended.