Shop fox SHOP FOX W1776 Owner'S Manual Download Page 3

Model W1776  2" Nailer Kit

-1-

SAFETY

Safety Instructions for Pneumatic Tools

1.   KEEP ALL SAFETY DEVICES IN 

PLACE 

and in working order.

2.   REMOVE ADJUSTING KEYS AND 

WRENCHES. 

Form habit of checking 

to see that keys and adjusting 
wrenches are removed from tool 
before operation.

3.   KEEP WORK AREA CLEAN. 

Cluttered 

areas and benches invite accidents.

4.   DO NOT USE IN DANGEROUS 

ENVIRONMENT. 

Do not use 

pneumatic tools in damp or wet 
locations, or where any flammable 
or noxious fumes may exist. Keep 
work area well lighted.

5.  KEEP CHILDREN AND VISITORS 

AWAY. 

All children and visitors 

should be kept at a safe distance 
from work area.

6.   MAKE WORKSHOP CHILD PROOF 

by 

locking your shop and shutting off 
air valves.

7.   DO NOT FORCE TOOL. 

It will do 

the job better and safer at the rate 
for which it was designed.

8.   USE THE RIGHT TOOL. 

Do not 

force tool or attachment to do a 
job for which it was not designed.

9.  DO NOT USE UNDER THE 

INFLUENCE OF DRUGS OR 
ALCOHOL.

For Your Own Safety Read Instruction Manual 

Before Operating This Equipment

The purpose of safety symbols is to attract your attention to possible hazardous 
conditions. This manual uses a series of symbols and signal words which are intended 
to convey the level of importance of the safety messages. The progression of 
symbols is described below. Remember that safety messages by themselves do not 
eliminate danger and are not a substitute for proper accident prevention measures.

Indicates a potentially hazardous situation which, if 
not avoided, MAY result in minor or moderate injury. 
It may also be used to alert against unsafe practices.

Indicates a potentially hazardous situation which, if 
not avoided, COULD result in death or serious injury.

Indicates an imminently hazardous situation which, if 
not avoided, WILL result in death or serious injury.

NOTICE

This symbol is used to alert the user to useful 
information about proper operation of the 
equipment.

Summary of Contents for SHOP FOX W1776





















Reviews: