background image

 

V. 

Failure analysis

:

 

Main failure analysis diagram (see Attached sheet IV) 

1. 

Common failures: 

Other failures 

Analysis procedure 

Image and 
accompanying sound 
are interfered. 

Inspect if the direction, position and connection of the antenna is 
proper. 
Inspect if the signal sources are inputted stably under the current 
playing status with no interference. 
Check if the signal wires are grounded properly. 
Check if there is any interference of electrical equipment near the 
unit. 
Check if the power voltage inputted is stable. 
Check if there are any buildings that reflect the broadcasting 
electromagnetic waves in the TV receiving environment. 
Start up and check if the various options are all correct. 

With static pictures 
but no images and 
accompanying sound 

Check for proper signal insertion. 
Check if the remote control functions properly. 
Check for correct settings of image and volume. 
Switch off and open the cover of the unit to check the signal terminal 
board. 

After a period of TV 
receiving, the unit 
will be switched off. 

Check if the TV signal is inputted properly under such phenomenon. 
Click the “MENU” key of the remote control and check for correct 
selection of the timed shutdown item. 
Check if it is caused by the computer connected. If a computer is 
connected, set the power-saving setting of the computer to “off”. 

No color image 

Check for proper signal source inputted currently. 
Open the menu system and click the remote control’s “MENU” key. 
Check for correct selection of the items concerning images. 
Switch off. Open the cover of the unit and check for proper contact of 
the data connection wire between the data conversion board and the 
display screen. 

Malfunction of 
remote control 

Check the polarity of the batteries placed in the remote control. 
Check if the batteries in the remote control are effective. 
Check the transmitting window of the remote control and the remote 
sensor window of the unit 

Others

 

Even the image and sound of the unit are normal, the enclosure will 
expand and sounds will be given once in a while along with the 
variation of the ambient temperature. This is normal. 

 
 
 
 
 
 
 
 

 

Summary of Contents for STV-32LED13















Reviews: