Shiv S-works, Instruction Manual, Page: 25 / 28

Page 22 of 23
CHAPTER 6: FUELSELAGE INSTALLATION
1. INSTALLING THE FUELSELAGE
The Specialized Fuelselage Integrated Hydration System reservoir is designed to fit exclusively with Specialized Shiv carbon frames, through the top tube port
and into the down tube. The Fuelselage hose can be trimmed to the desired length, and combined with the mouth port magnet and matching magnet loop, the
valve location can be customized to the rider’s ideal location.
1 2 3
1. Fig.1: Thread the hose through the reservoir top cover, the mouth port, then through the hose sleeve.
2. Fig.1: Place the threaded nut onto the hose, below the hose sleeve.
3. Fig.1: Press the hose onto the fitting at the base of the reservoir, then thread the nut onto the fitting.
4. Fig.2: Insert the reservoir into the port in the top tube of the frame. Use the hose to help guide the reservoir into the frame, to prevent bunching.
5. Fig.3: Thread the screw supplied with the Fuelselage into the threaded rivet. The ferromagnetic screw allows the mouth port magnet to function.
6. Fig.3: Place the clip at the front of the mouth port under the lip of the top tube port, then lower the magnetic tip of the mouth port down until the
magnet comes in contact with the screw.
4 5
7. Fig.4: Place the magnet loop around the aero extension, on the desired side.
8. Fig.4: Once the rider position and magnet loop position are determined, if the hose is too long, remove the silicone straw and carefully cut the hose
down to the desired length, so that the magnet in the silicone straw lines up with the magnet loop.
9. Fig.5: Fill the reservoir with drinking fluid.
NOTE: Do not fill with alcohol, milk products or hot beverages. Clean out the reservoir regularly with a mild detergent.
A video instruction guide is available at http://servicevideos.specialized.com .