Page
1
of
6
IoT-Box
/Quick Start Guide
/
www.shiratech-solutions.com
Rev 2.0
1.
Quick Start
Follow these instructions to start using your IoT-Box:
1.
Download the IoT-Box Debian image from
http://www.shiratech-solutions.com/products/iot-box/
2.
Extract the file and flash the image to an SD card (using Win32DiskImager or any other similar tool).
3.
Insert the SD card to the IoT-Box.
4.
Connect the IoT-Box to your PC using a micro USB cable via the Console micro USB
connector and turn the power switch on.
5.
Connect to the IoT-Box via the serial interface (using TeraTerm/Putty or any similar tool)
with a 115200 baud rate.
6.
Type:
~$: nmtui
to launch the Wi-Fi settings and connect to Wi-Fi. Once Wi-Fi connection has been
established you may update and upgrade the Debian OS using:
~$: sudo apt-get update
~$: sudo apt-get upgrade
7.
Test Bluetooth connectivity using the following commands:
~$: hciconfig
~$: hciconfig hci0 up
~$: hcitool scan
Console
SD card
Power Switch
Summary of Contents for IoT-Box
Page 1: ...IoT Box Quick Start Guide...