Shinybow USA SB-6335T Instruction Manual Download Page 3

Page: 3 / 12

CONTENTS

TABLE OF CONTENTS ....................................................1
PACKAGE CONTENTS .................................................. 1
FEATURES & SPECIFICATIONS ..................................... 2
TYPICAL HOOKUP & OPERATION ................................ 3
IR EXTENDER ................................................................ 4
RACK MOUNT ............................................................... 6

INTRODUCTION

Congratulations on your purchase of one of the most innovative
HDMI 1.4a over single category cable Transmitter with RS-232
on the market today. SB-6335T HDBaseT™ Transmitter can
transmit the HDMI signal, IR Remote signals input or output
and RS-232 I/O series interface to the other size HDBaseT™
Receiver (SB-6335R) via single category LAN cable for the long
distance Maximum 328 feet (100M). Transmitter use the single
CAT6, CAT6a or CAT7 (UTP/FTP) category cable via RJ-45
8P8C female socket. The LAN cable support the 568a or 568b

LAN color specification table. This product provide higher full HD

HDMI 1.4a, HDTV Resolution supports 480i/p, 720p,1080i/p or
High 4K2K quality that are identical to the source high quality
full HDMI 1.4 signals. The Transmitter is useful for sending the
HDMI digital Video & digital multi-channel audio format signals,
IR remote in or IR remote out, RS-232 series in and RS-232
series out. Controls signals via single category cable transmit to
the HDBaseT™ Receiver.

PACKAGE CONTENTS

Check that you have the following components;

•

SB-6335T HDBaseT™ Transmitter console

•

Users Guide

• AC/DC Adapter: 12VDC/2A (universal power switch 50/60Hz,

100~240VAC)

HDBaseT™ with Ethernet 100M EXTENDER Series

Thank you for purchasing the SB-6335T HDBaseT™ with RS-232 Transmitter. You will find this unit easy to install and highly
reliable but it is essential that you read this manual thoroughly before attempting to use Extender.

TABLE OF CONTENTS

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this

equipment:
• Always follow basic safety precautions to reduce the risk of fire,

electrical shock and injury to persons.

• To prevent fire or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any

openings or empty slots in the unit, as you may damage parts
inside the unit.

• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the

PSU if it is damaged.

• Do not allow anything to rest on the power cabling or allow any

weight to be placed upon it or any person walk on it.

• To protect the unit from overheating, do not block any vents or

openings in the unit housing that provide ventilation and allow for

sufficient space for air to circulate around the unit.

DISCLAIMERS

The information in this manual has been carefully checked and
is believed to be accurate. We assume no responsibility for any
infringements of patents or other rights of third parties which may
result from its use.

We assume no responsibility for any inaccuracies that may be
contained in this document. We make no commitment to update
or to keep current the information contained in this document.

We reserve the right to make improvements to this document
and/or product at any time and without notice.

No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated

into any language or computer file, in any form or by any means

— electronic, mechanical, magnetic, optical, chemical, manual,
or otherwise — without express written permission and consent

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document may
be trademarks of the companies with which they are associated.

CONFORMANCE TEST REPORT

FOR

EN 61000-6-1 / EN 61000-6-3

REPORT NUMBER: 09-07-MAS-282-18-R

FOR

FCC 47 CFR/Part 15 Subpart B